Precision measuring device Monitoring support device

Myself-1 FAB

Flange, shaft end mounting specifications

Features

Equipped with manual balance function

When an unbalance that greatly exceeds the balancer's correction amount occurs and cannot be completely removed with an automatic balancer, or when the balance needs to be corrected during maintenance or repair of the head unit (balancing head/power supply head). , a function that allows you to manually correct the balance.
*The grinding wheel flange must be equipped with a weight for balance correction.
*If the head unit is not available due to repairs, etc., a rotation sensor (sold separately) is required.

Gap Monitor

The unique gap monitor checks or monitors the distance (gap) from the controller to the balancing head .

Example of Installation

①Acceleration sensor
It is a sensor that measures the vibration state.
More accurate balance adjustment can be achieved by installing it in a place where the vibration of the grindstone is easily transmitted, such as the bearing, and near the rotating body to be balanced.
②Balancing head
A weight for balance adjustment is built in the head, and it is a device that adjusts the balance by moving the weight to the position where the imbalance is canceled.
It is recommended to install it on the rotating body side that is the target of balance adjustment,but if the rotating body side cannot be installed due to space or structure, it is possible to adjust the balance by installing it on the pulley side.
③Power supply head
It is a unit that supplies power to the rotating balancing head in a non-contact manner.
It is fixedly installed at a position of 2.0 mm ± 0.5 mm from the balancing head.
You can check the gap between the heads on the gap monitor.
④Controller
It is a device that calculates the data required for balance adjustment from the measured vibration information.Install it in a position where the display is easy to see and key operations are easy.

Specifications

FAB controller
Range of measurable vibration level 10　～　250　Hz ( 600　～　15000 / min )
Range of measurable displacement 0.01 to 500 µm(P-P)
Channel 1 ch
Display 3.5-inch TFT color LCD
Displays values, procedures, or error codes.
Dimensions

W198×D165×H75　mm
Weight: About 1.5 kg
Usage conditions

Usage temperature:　0 to 65°C

Usage humidity:　85%RH
Power source DC 24 V
Communication I/O port
Balancing head
min⁻¹

7,000min⁻¹　at maximum
　Correction amount : 1,000 g·mm
Correction amount
50,000g·mm at maximum
min⁻¹: 2,000 min⁻¹
Gap

2.0±0.5 mm (MAX3 mm)
Usage conditions Usage temperature: 0 to 65°C

International Protection：Equivalent to IP67
Power feeding head Power feeding method Non-contact power feed by the electromagnetic induction
International Protection Equivalent to IP67
　　
FAB-HSZ series
Type of head Correction amount Model Maximum min⁻¹
～ 1,000 g‐㎜ FAB-HSZ01SP 7,000 min⁻¹
～ 3,000 g‐㎜ FAB-HSZ03SP 5,000 min⁻¹
～ 5,000 g‐㎜ FAB-HSZ05SP 5,000 min⁻¹
～ 7,000 g‐㎜ FAB-HSZ07SP 3,600 min⁻¹
～ 10,000 g‐㎜ FAB-HSZ10SP 3,600 min⁻¹
～ 12,000 g‐㎜ FAB-HSZ12SP 3,600 min⁻¹
～ 14,000 g‐㎜ FAB-HSZ14SP 3,600 min⁻¹
～ 16,000 g‐㎜ FAB-HSZ16SP 3,600 min⁻¹
～ 18,000 g‐㎜ FAB-HSZ18SP 3,600 min⁻¹
～ 20,000 g‐㎜FAB-HSZ20SP 3,600 min⁻¹
Power feeding head Type-D
Dimensions of head ファイバセンサ

a φ120

b φ140

c 69

d φ126

e 33

f φ21.6
FAB-HMZ series
Type of head Correction amount Model Maximum min⁻¹
～ 25,000 g‐㎜ FAB-HMZ25SP 2,500 min⁻¹
～ 30,000 g‐㎜ FAB-HMZ30SP 2,500 min⁻¹
～ 35,000 g‐㎜ FAB-HMZ35SP 2,000 min⁻¹
～ 40,000 g‐㎜ FAB-HMZ40SP 2,000 min⁻¹
～ 45,000 g‐㎜ FAB-HMZ45SP 2,000 min⁻¹
～ 50,000 g‐㎜ FAB-HMZ50SP 2,000 min⁻¹
Power feeding head Type-D
Dimensions of head ファイバセンサ

a φ191

b φ210

c 70

d φ126

e 33

f φ21.6

You may also be interested in the following products.

Find products by industry / industry

CONTACT

Related information

Demonstration Room＞
Videos＞
OKK BLOG＞